UN1ON FIX

Typical Properties

Precaution:

• When not in use container should be keep closed.
• Skin formation, if any, should be removed from the container before use. Stir well before use.

Shelf Life:

• Best to use within 12 months from the date of manufacture.

Storage:

• Store in a cool and dry place for better shelf life.

Application Methods

• Surfaces to be bonded should be free from oil, grease, dust and dirt and should be dry and properly leveled.
• For best results, roughen the surfaces to be bonded.
• Stir contents of container before use.
• Apply an even coat of adhesive first on a comparatively non-porous surface, and then on a porous surface for e.g. apply first on laminate and then on plywood.
• If possible, application should be lengthwise on one surface and breadth wise on another surface. This will help in proper and uniform spreading of adhesive while pressing.
• Do not allow adhesive to dry and bring both the surfaces in contact, align properly, and start pressing from one side by using wet squeezed cloth to avoid bubbles, and ensure uniform contact and no air interruption between both surfaces.
• Pressure can be given by using nails, clamps, weight, masking tape, etc.
• Excess adhesive that comes out from edges should be wiped with wet squeezed cloth.
• To get best results, bonded surfaces are to be kept under pressure for 24 hours.
• Learn more about choosing the right adhesive for plywood based on the surface, application, and bonding requirements.

Applications